What Should I Do If The Vacuum Skin Packaging Machine Cannot Seal?

If Map Tray Sealing Machine is not sealed, many faults may occur, which will directly lead to packaging failure and even cause equipment shutdown. In addition to comprehensive after-sales maintenance services, each vacuum packaging machine is equipped with spare parts and equipment manuals when it leaves the factory, which explain in detail how to maintain and maintain the equipment during use. So what should be done if the sealing is not good during use?

There is oil in the bag and it is not sealed well. This is not a technical or product quality problem. Choose Buchner funnel packaging before packaging, seal or simple operation. Adequate heating temperature, adjust the thermometer, standard plastic bag can be heated for about 2 seconds; check whether the metal strip set under the insulation layer is damaged. Whether the vacuum pump is working properly; the heating cloth is always kept clean to prevent debris from melting in the heating cloth.

Check the working pressure of the push cap; pay attention to the aging of the heating wire; the failure of the heat seal relay will also affect this function, and the parts can be replaced; the contact between the heating wire and the copper screw is good, and whether the transformer is working; vacuum packaging machines usually cause various problems due to the special reasons of the products. If problems occur, the following vacuum pumps, heating cables, heat seal relays, etc. should be carefully identified. If there are other problems, you can grasp the matters that need to be paid attention to in the work of the vacuum packaging machine in advance and formulate preventive measures in advance.