What Are The Daily Maintenance Methods For Small Vacuum Packaging Machines?

Map Packaging Equipment has a wide range of uses, is very stable during operation, and occupies a small area, and is deeply favored by everyone. The editor will tell you about the daily maintenance methods of small vacuum packaging machines? If you are interested in this question, you might as well learn it.

The small vacuum packaging machine is equipped with a high-intelligence detection system. If it detects that the bag is not opened, it will not be unloaded, and if it is not unloaded, it will not be sealed, saving production costs for the company. Of course, it also packs a lot of types when it is used. For example, it is not limited to the packaging of one material. It can be powder, solid, semi-solid and other materials. Moreover, it is not limited to the food industry during operation. The packaging machine can also be used in chemical, electronic and other industries. Of course, in addition to the daily use of small vacuum packaging machines, we must also pay attention to maintenance and maintenance, which is also a very important thing. If it is done well, the integrity of each component will be ensured. First of all, it is recommended that you check the firmness of its components before starting the machine. If any abnormality is found, it should be handled in time to avoid accidents. Small vacuum packaging machines should be used in an environment with a temperature of -10℃-50℃, a relative humidity of no more than 85%, and no corrosive gas, dust, or explosive hazards in the surrounding air. In addition, the personnel using the equipment need to check the oil level and observe the color of the oil once a week. If the oil level is lower than the "MIN" mark, it is necessary to refuel.

The maintenance of small vacuum packaging machines is very important. Only if it is done well can its life be extended. And reversal is not allowed when maintaining small vacuum packaging machines. The vacuum pump uses No. 0 vacuum pump oil, and imported vacuum pumps should use imported vacuum pump oil. Small vacuum packaging machines should also check the oil level frequently. The normal oil level is 1/2-3/4 of the oil window (not more than). When there is moisture in its vacuum pump or the oil color turns black, it proves that the oil has been contaminated. Then what we have to do at this time is to replace the vacuum pump oil immediately. Before replacing the vacuum pump oil, the vacuum pump should be operated for 15-30 minutes. If all these tasks are done, it should be stopped after the oil temperature rises and the power supply should be cut off. Unscrew the oil filling cap, then open the oil drain bolt and drain the oil. Then, tighten the oil drain bolt to extend its life. And fill the new vacuum pump oil to the specified height and tighten the oil filling cap. It is also necessary for the staff to check the oil level of the water pump regularly every week, replenish the oil in time, and ensure that the oil level is just half of the deep oil cover. If these tasks are done well, it will be very good to avoid running out of oil and burning the water pump.