Fully Automatic Vacuum Packaging Machine: How The Fully Automatic Vacuum Packaging Machine Works

How Map Packaging Machine works

When using a fully automatic vacuum packaging machine, a forming mold is necessary. First, the film needs to be heated, and then the heated film is placed in a forming container for forming, and then the package is transferred to the formed lower mold cavity, so that vacuum packaging can be performed.

There are two types of films used for deep-drawing packaging, one is soft film and the other is hard film. The film has excellent formability and transparency, and its main advantages are oxygen barrier, heat resistance, adhesion, flatness, anti-fog and easy unsealing.

With this film and a thermoforming packaging machine, not only solids, liquids, soft objects and fragile products can be packaged, but also vacuum soft film packaging, hard film inflation packaging, blister packaging, etc. The main features of this machine are hygiene, labor saving and low cost.

The fully automatic vacuum packaging machine is suitable for vacuum or modified atmosphere packaging of industrial products such as frozen cut meat, cold fresh meat, meat products, bean products, seafood, snack foods, medical products, medical devices, electronic components, hardware tools, etc., which is a new trend in the packaging industry.

Analysis of common problems of fully automatic vacuum packaging machines

Fully automatic vacuum packaging machine, with reliable product quality and many domestic customers, is your ideal choice for purchasing fully automatic vacuum packaging machine.

With the continuous development of society, the use of fully automatic vacuum packaging machine basically runs through various industries, from food, clothing, housing and transportation to the development of industrial and agricultural industries. But as long as it is a machine, there will be various problems, so today we will analyze the common problems and solutions of fully automatic vacuum packaging machines with you.

1. No vacuum

This problem is very simple. First, the packaging bag may be leaking and need to be replaced. Second, the heat-sealed air chamber may not have vacuum during vacuum, which needs to be repaired and eliminated; then there may be a gasket on the 1DT iron core or a sealing ring in the magnetic cover leaking, which can only be repaired or replaced;

2. The sealing strength of the fully automatic vacuum packaging machine will be insufficient

At this time, you have to pay attention. First, check whether the temperature and time adjustment are too low or too short. If so, readjust it. Secondly, whether the vacuum time adjustment is too short, the solution is to adjust it to less than or equal to -0.08 MPa; if none of the above is true, you need to check whether the heat-sealed air chamber is broken. If this is the case, it will be replaced.

3. Uneven sealing or corrosion

This is mainly because there are problems with temperature and time. The solution is to readjust; or 2sj does not work. The solution is to readjust; repair or replace. If the heat sealing delay is found to be too long, cut off the power supply in time.

The above three problems may occur in the use of the fully automatic vacuum packaging machine. However, in real life, various problems will arise, and special cases and special analysis will be required at that time. The key to eliminating and solving problems is to carefully find the cause of the problem, which is the root of solving the problem.